450 GPM Towable Hydrant Cart
Chassis: 4-Wheel Trailer with Steerable Front Axle
Pumping System: 450 GPM System
Configuration: One Wraparound Inlet Hydrant Hose & One Underwing Hose Reel
Garsite 450 GPM Towable Hydrant Cart Spec Sheet (PDF 0.6 MB)
CHASSIS: RUNNING GEAR
Heavy duty (4) wheel trailer Fully rated suspension (for towing up to 35 MPH) Ackerman style steering front axle
FEATURES
- Fully self contained and maintenance free pressure control system (no external air source, electrical source, or nitrogen source required).
- All aluminum frame and hose reel (for low maintenance)
- Fully integrated solar powered system; includes battery for electronic meter and interlock system.
DIMENSIONS
Length, 128″, width, 65″, height, 64″.
REFUELING SYSTEM
450 GPM / 1700 LPM.
HYDRANT COUPLER
Pressure controlling coupler to mate with 4″ API
FILTER/MONITOR
Filter/monitor, 450 G.P.M. rated and equipped with a direct reading differential pressure gauge, purge valve, pressure relief valve, air eliminator and drain valve. F/M meets IP specifications.
DEADMAN CONTROL
Lanyard operated with 50′ of cord.
PRESSURE CONTROLS
Hose end control valve and pressure controlling coupler are provided.
METER
450 G.P.M. rated with large numeral reset counter and totalizer, registers in whole U.S. gallons or liters.
SINGLE WRAP FUELING HOSE
Single wrap style, aluminum manual rewind hose reel sized for 2 1/2″ x 50′ hose, non-ferrous internals. A shut off valve is installed immediately upstream of the reel.
FUELING HOSE
One 2″ x 50′ aviation fueling hose with N/R male couplings, certified to API 1529 specifications.
UNDERWING NOZZLE
One standard 3-lug underwing nozzle with H.E.C.V., 100 mesh strainer and swivel.
WRAP AROUND STYLE INLET HOSE
Includes 20′ of 2 1/2″ hose and pressure controlling hydrant pit coupler.
PRODUCT RECOVERY TANK
20 gallon capacity with fill opening and drain valve.
PIPING
Aluminum – 150 PSI rated working pressure.
GAUGE PANEL
The panel will include a fuel sense pressure gauge, D/P gauge.
SAFETY FEATURES
Manual rewind static reel with 50′ cable and clip, brake interlock system, emergency shut-down system and one fire extinguisher.
COMPLIANCE
Meets all applicable NFPA 407 codes. Design complies with ATA-103 requirements.
OPTIONS
A complete list of options is available on request, including Hydrant coupler without pressure control to mate with 2 1/2″ bayonet adapter, custom paint, ticket printers, electronic registers and other items.